Справочник Пользователя для Movea Inc MPOD1
10
FIGURE 5 : THE MOTIONPOD™ FIXED ON THE MOTIONCONTROLLER™, READY FOR RECHARGE
While charging, an orange light indicator located at the back of the MOTIONPOD™ switches on. It
switches off as soon as the recharging process is complete. Theoretically, charging duration is 3
hours.
switches off as soon as the recharging process is complete. Theoretically, charging duration is 3
hours.
When the MOTIONPOD™ is recharged after a very long period of no use, it is possible that the
orange light indicator takes a few minutes before switching on.
orange light indicator takes a few minutes before switching on.
If the battery reaches its critical point due to a long period of storage, the only solution is to return
the MOTIONPOD™ to your supplier for battery replacement (at own expense).
the MOTIONPOD™ to your supplier for battery replacement (at own expense).
It is dangerous and strictly prohibited to use any other charging equipment than
the MOTIONCONTROLLER™ of Movea. Using other charger can damage the
MOTIONPOD™ and will void your manufacturer warranty.
the MOTIONCONTROLLER™ of Movea. Using other charger can damage the
MOTIONPOD™ and will void your manufacturer warranty.
The MOTIONPOD™ should not be opened. The battery replacement should be
carried out by your supplier.
carried out by your supplier.
2. HOW TO SWITCH THE MOTIONPOD ON AND OFF
The MOTIONCONTROLLER™ must be connected to the PC. The MOTIONPOD™ must formerly be
recharged. Take the MOTIONPOD™ off the MOTIONCONTROLLER™.
recharged. Take the MOTIONPOD™ off the MOTIONCONTROLLER™.
Slightly push the button on the MOTIONPOD™ to switch it on. At this stage, the green light indicator
blinks with a 5 second interval. The MOTIONPOD™ is not in transmitting any data to the
MOTIONCONTROLLER™ at this stage, it is simply on standby. You can switch the MOTIONPOD™ off
by a pressing on the button for 4 seconds. The green light indicator blinks twice before switching off
blinks with a 5 second interval. The MOTIONPOD™ is not in transmitting any data to the
MOTIONCONTROLLER™ at this stage, it is simply on standby. You can switch the MOTIONPOD™ off
by a pressing on the button for 4 seconds. The green light indicator blinks twice before switching off