Справочник Пользователя для Movea Inc MPOD1
4
MPOD
charging cavity
Spring contacts for
electrical link with the
MPOD
Light indicators
USB
port
rx tx pwr
Green power light:
indicates that the
Motion Controller is
receiving power
Blue RX/TX lights:
RX signal reception
TX signal transmission
FIGURE 2 : MOTION CONTROLLER
III. SAFETY RULES
Warning
Please read this user’s guide very carefully before use.
Advise all recommendations to end-user and keep him informed of all risks endured using the
system.
MOTIONCONTROLLER™ must be plugged using equipment in compliance with INTO standard
60950-1 via USB2 port with the provided cable. In order to fulfill safety requirements for electro-
medical systems and equipments, power must be supplied by a transformer in compliance with the
EN standard 60601-1.
MOTIONPOD™ is the only part in contact with the patient, so by no means they’re to be in contact
with the MOTIONCONTROLLER™ or the computer during use. Patients are to be held at 1,20m to
1,60m away from this equipment.
Please read this user’s guide very carefully before use.
Advise all recommendations to end-user and keep him informed of all risks endured using the
system.
MOTIONCONTROLLER™ must be plugged using equipment in compliance with INTO standard
60950-1 via USB2 port with the provided cable. In order to fulfill safety requirements for electro-
medical systems and equipments, power must be supplied by a transformer in compliance with the
EN standard 60601-1.
MOTIONPOD™ is the only part in contact with the patient, so by no means they’re to be in contact
with the MOTIONCONTROLLER™ or the computer during use. Patients are to be held at 1,20m to
1,60m away from this equipment.
Do not open or replace the Li-ion battery of the MOTIONPOD™. Do not use non
rechargeable battery or any other battery other than the one provided by
Movea. It could damage the product and presents health risks or cause
accidents.
DO NOT EXPOSE TO FIRE–Risk of explosion, DO NOT OPEN