Справочник Пользователя для HID Global Corporation 5553
HF Multi ISO RFID Reader User Manual, Firmware V1.4
1508-USM-00-0-04
The Application can and should provide more barriers:
Sector access conditions. It is possible to assign access conditions in a way that only
decrementing of values is allowed with the keys used in the field. So even a
manipulated field station cannot be used to increment the value on the cards. As a
general rule, key A is used as a field key, allowing only to read and decrement values,
and key B is used to format the card or increment values.
decrementing of values is allowed with the keys used in the field. So even a
manipulated field station cannot be used to increment the value on the cards. As a
general rule, key A is used as a field key, allowing only to read and decrement values,
and key B is used to format the card or increment values.
Diversified keys. To make life even harder for attackers, keys can be modified using
the serial number and memory content of the card. So each card uses different keys
and a listening attack on the reader interface would be hopeless.
the serial number and memory content of the card. So each card uses different keys
and a listening attack on the reader interface would be hopeless.
Limiting cash volume stored on a card
Do not use the transport keys (keys programmed at the time of delivery) for ticketing
applications!
applications!
Ciphered and scrambled data storage
Sabotage
alarm
Even higher security with contact less controller cards like DESFire, MIFARE ProX,
MIFARE Smart MX etc.
MIFARE Smart MX etc.
Q.
How do I use a MIFARE card?
A
This example demonstrates the detection of a card in the antenna field with continuous
read and the reading of a page.
read and the reading of a page.
Command
Answer
C
Activate continuous read mode
B2197B58
a card responds with its serial number
a card responds with its serial number
. S
abort continuous read mode
S B2197B58
select card
l01AAFFFFFFFFFFFF L
login into sector 1 with key FFFFFFFFFFFFh key type A
rb04 00112233445566778899AABBCCDDEEFF
read block 04
c
Activate continuous read mode to detect a new card
August 2010
Page 107 of 144
© 2005-2010 HID Global Corporation. All rights reserved.