Справочник Пользователя для Trimble Inc. 8262090
SNRx10 Radio Modem User’s Guide 25
Configuration 3
3.4
Configure ports
The Configure ports operation allows you to configure the radio’s serial port.
To configure the radio’s serial port, complete the following steps:
1.
From the Operations menu, select Configure ports and click on Next. A
Settings Review screen similar to the following appears:
Settings Review screen similar to the following appears:
2.
Click on Finish. A progress bar appears while WinFlash attempts to connect to
the radio. When WinFlash connects to the radio, a Configure Serial Ports
dialog similar to the following appears:
the radio. When WinFlash connects to the radio, a Configure Serial Ports
dialog similar to the following appears:
3.
Complete the following steps:
a.
Set the baud rate to that of the system that the radio is connected to.
b.
Set the parity as appropriate for the system that the radio is connected to.
c.
Select the appropriate operating mode.
Note – Default settings are 38400 baud, no parity.
Mode
Band (MHz)
Description
GPS Corrections
450, 900, 2400
Output CMRs on serial port
IP 2-way Data
900
IP (PPP) 2-way data on serial port
DRAFT