Справочник Пользователя для Trimble Inc. 8262090
4
Installation
3 4
SNRx10 Radio Modem User’s Guide
4.1
Attach the SNRx10 radio modem bracket
The SNRx10 radio mounting kit consists of:
•
A mounting bracket
•
An adapter plate
B
Tip – For detailed information on the various ways of assembling the radio and mounting
bracket, refer to SNRx10 Data Radio - Mounting Instructions (PN 65189-00-ENG). This
document is provided in the SNRx10 radio kit.
bracket, refer to SNRx10 Data Radio - Mounting Instructions (PN 65189-00-ENG). This
document is provided in the SNRx10 radio kit.
4.1.1
Select a location for the radio mounting bracket
When you mount the radio on a machine, consider the following points:
•
Reduce damage by minimizing shock and vibration to the radio. Use the shock
mounts to mount the radio onto a solid part of the cab.
mounts to mount the radio onto a solid part of the cab.
•
Locate the radio with an uninterrupted view. Mount the entire radio above the
roofline to improve the performance of the radio.
roofline to improve the performance of the radio.
•
Prevent signal interference. Position the radio away from other antennas,
particularly if one of the other antennas is a two-way radio. Also position the
radio away from rotating beacons, air conditioning fans, and strobe lights.
particularly if one of the other antennas is a two-way radio. Also position the
radio away from rotating beacons, air conditioning fans, and strobe lights.
•
The radio cable must be able to reach from the main harness to the radio. To
achieve this, consider the following points:
achieve this, consider the following points:
–
The length of the radio cable, which connects to the rear harness cable.
–
The location of the rear harness radio connector and the route for the radio
cable.
cable.
•
The radio assembly must be mounted on a solid part of the cab.
4.1.2
Install the radio mounting bracket
To attach the radio adapter plate to the machine, complete the following steps:
1.
Securely mount the adapter plate to the cab of the machine. Use one of the
following methods:
following methods:
–
Bolt the adapter plate to the cab using the two supplied mounting bolts.
–
Weld the plate to the cab.
2.
Bolt the radio onto the mounting bracket. Ensure the mounting screws are all
fitted with washers and lock washers.
fitted with washers and lock washers.
3.
Bolt the radio mounting bracket to the adapter plate, using the rubber shock
mount kit. The bolts are included with the adapter plate.
mount kit. The bolts are included with the adapter plate.
–
Use thread locking Loctite (P/N 33803), or equivalent to secure the bolts
when assembling the shock mount kit.
when assembling the shock mount kit.
–
Remove paint from edges of the adapter plate prior to welding.
DRAFT