Справочник Пользователя для Pantech PG-6100
126
Receive Mode
[1.6.2]
Sets up Push Message receiving.
- Accept All: Receives all Push messages.
- Accept None: Rejects all Push messages.
Go to URL
[1.7]
Allows you to directly input and connect to the desired URL.
Profiles
[1.8]
Selects or edits the Connection Profile supplied by the
phone.
phone.
Select the Profile List and press the [
O
] key for setup.
The Unedited Profile will not be selected.
Select the Profile List and press the [Edit] Soft key to edit a
profile.
profile.
- Profile Name: Pressing the [
O
] key allows you to enter the edit
mode to change a profile name.
- Home URL: Pressing the [
O
] key allows you to enter the edit
mode to edit the Homepage URL provided by the service
provider.
provider.
- Connection Type: Select either WAP or HTTP.
- GSM Settings: This menu allows you to set the GSM network
proxy, and has the following sub-menus:
- Gateway/Proxy: If you set the Connection Type for WAP,
Gateway appears. If you set it for HTTP, Proxy appears.
Pressing the [
Gateway appears. If you set it for HTTP, Proxy appears.
Pressing the [
O
] key allows you to access the submenus such
as IP Address, IP Port, Login ID and Password. For each
submenu, pressing the [
submenu, pressing the [
O
] button lets you enter edit mode to
edit every item provided by the service provider.
- Data Call Type: Use the left or right navigation key to select
from the two modes: ISDN and Analogue.
from the two modes: ISDN and Analogue.
- Dial Number: Pressing the [
O
] key allows you to enter the edit
mode to change this item.
- Login ID: Pressing the [O
O
] key allows you to enter the edit
mode to change this item.
- Password: Pressing the [
O
] key allows you to enter the edit
mode to change this item.
- GPRS Settings: This menu allows you to set the GPRS network
proxy, and it has the following sub-menus:
- Gateway/Proxy: If you set the Connection Type for WAP,
Gateway appears. If you set it for HTTP, Proxy appears.
Pressing the [
Gateway appears. If you set it for HTTP, Proxy appears.
Pressing the [
O
] key allows you to access the submenus such
as IP Address, IP Port, Login ID and Password. For each
submenu, pressing the [
submenu, pressing the [
O
] key lets you enter edit mode to edit
every item provided by the service provider.
- APN: It stands for Access Point Name. Pressing the [
O
] key
lets you enter the edit mode to change this item.
- Login ID: Pressing the [
O
] key lets you enter the edit mode to
change this item.
- Password: Pressing the [
O
] key lets you enter edit mode to
change this item.
- DNS Settings: Enter the IP address for the Domain Name Server.
You may enter primary and secondary DNS. This function is
available only when you are connected to HTTP.
available only when you are connected to HTTP.
- Bearer: This lets you select the bearer type for each type of
network access. Using the left or right navigation key allows you
to select from the two modes: GSM Only and GPRS Only.
to select from the two modes: GSM Only and GPRS Only.
127
WAP
WAP
NOTE: The parameter settings are already entered as required by the
service provider. Care should be taken when you make any modification
to a profile since it may cause WAP to be inoperative.
service provider. Care should be taken when you make any modification
to a profile since it may cause WAP to be inoperative.
050811_PG-6100_EN-출력(86수정) 2005.8.17 1:32 PM 페이지126