Справочник Пользователя для Pantech pg-6200

Скачать
Страница из 60
When you are unable to charge the battery:
This may be the result of one of the following three cases.
Your charger may be out of order. Contact your nearest
dealer.
You may be attempting to use the phone in an overly
hot/cold temperature. Try changing the charging
environment.
Your battery may have not been connected to the
charger properly. Check the connector.
When you are unable to input data into your
Contacts:
Your Contacts memory may be full. Try deleting some
entries from your Contacts.
When you are unable to select a certain function:
You may not have subscribed to that function, or your
network service provider may be in an area where such
service cannot be provided. Contact your local service
provider. 
Performance and safety
The following list shows how to maintain your mobile phone,
together with precautions to take.
Keep your mobile phone and its accessories out of the
reach of children.
Maintain your mobile phone in dry conditions and keep it
within normal operating temperatures. Temperatures
higher than 55°C (131°F) or lower than -20°C (-4°F) may
damage your phone.
Do not use or store your mobile phone in dusty, dirty areas.
Do not attempt to disassemble your mobile phone.
Do not drop or cause severe impact to your mobile phone.
Do not use chemical products, cleaning solvents or
detergents to clean your mobile phone. 
If your mobile phone does not work properly, contact your
dealer immediately. 
Use only authorized batteries, battery chargers and
accessories. Any malfunction or damage caused by the
use of unauthorized batteries, battery chargers and
accessories will void the limited product warranty.
Ensure that the earthing points of the battery and battery
charger do not come in contact with conductive objects. 
113
Troubleshooting checklist & Performance and safety
If you experience any problem while using your mobile
phone, please refer to the following checklist. If the problem
still persists, contact your dealer or nearest service center.
When the “Insert SIM Card” message appears: 
Make sure the SIM card is correctly installed. Check to see
if the SIM card is working properly. If it does not work, try to
clean the contact points of the card. If it is out of order, take
it to the nearest service center.
When the “Handset locked enter password”
message appears:
Enter the phone password. If you cannot remember the
password, contact the nearest service center.
When the “Enter PIN1” message appears:
InputPIN1. If you cannot remember it, contact the nearest
service centre. You can still receive calls even if your mobile
phone becomes locked after entering the incorrect PIN1 on
three consecutive attempts.
When the “No service” or “Network failure”
message appears:
Check the SSI (Signal Strength Indicator) state. If you
cannot make a connection in underground areas or in
buildings where signal strength may be low, try moving to
another place. If you still cannot make a connection, contact
the nearest service center.
When audio quality is poor:
End the call and try again. 
When the other party cannot hear you speaking:
Your phone may be set to MUTE. Disable the MUTE
function.
When battery lifetime is shorter than usual:
This may happen when you are in an area with low signal
strength. Turn off your phone when it is not in use. Change
the battery when battery energy is exhausted.
When your mobile phone does not turn on:
Make sure your battery is charged. Check to see if your
phone works while recharging the battery.
When you are unable to send a message:
Either you are not registered to receive an SMS service, or
you may be in an area where your network service provider
cannot provide such a service.
When you are unable to make a call:
Your phone may be set to “fixed dial.” Cancel the “fixed dial”
function.
Troubleshooting checklist
112