Справочник Пользователя для Giant Electronics Ltd 2G4DSS24NS3
OLYMPIA OL2410 Owner's Manual
15
4 Handset Registration Procedure
A Handset, which has not been registered, will display:
NOT REGISTERED
PLACE IN BASE
Plug the power supply into a live electrical outlet and the DC connector into the
bottom of the Base. Place the Handset (with battery pack plugged in) into the Base
cradle. In approximately 60 seconds, the Handset will beep, indicating registration
has been completed. The Handset display will say “READY.”
bottom of the Base. Place the Handset (with battery pack plugged in) into the Base
cradle. In approximately 60 seconds, the Handset will beep, indicating registration
has been completed. The Handset display will say “READY.”
A previously registered Handset will display “OUT OF SERVICE” if taken out
of range or if the Base loses power.
of range or if the Base loses power.
OUT OF SERVICE
Return to the Base or power up the Base again, then place the Handset in the Base
cradle. In approximately one minute, the Handset will regain its registration.
cradle. In approximately one minute, the Handset will regain its registration.
PDF created with FinePrint pdfFactory trial version