Справочник Пользователя для Rosemount Tank Radar AB LOOPRADAR

5-10

Edition 1.

Ref. No: 307010E

Using the Display Panel

5.6 Setting up the Analog Output

Output parameter
1.

Choose sub menu [2-1].

2.

Choose one of the following parameters as source signal for the Analog
Output:
0: Level,
1: Ullage,
2: Volume (%),
3: Amplitude.

Output range
1.

Choose sub menu [2-2] to enter the Minimum Output value corresponding to
the Analog Output value 4 mA.

2.

Choose sub menu [2-3] to enter the Maximum Output value corresponding to
the Analog Output value 20 mA.

Setting up the Alarm Mode
1.

Choose sub menu [2-4] to specify Alarm mode for the Analog Output.

2.

Choose one of the following options:
0: High. The current is fixed at 22 mA when an alarm is activated.
1: Low. The current is fixed at 3.9 mA when an alarm is activated.
2: Hold Last Value. The analog output current is fixed at the present value.