Справочник Пользователя для CALAMP WIRELESS NETWORKS INC. BDP4-EXCT769
001-2019-500 Rev 0
Paragon4 – UHF, 700 & 800MHz User Manual
34
6.8 Setup (Advanced)
6.8.1
Setup (Advanced) ► LAN (IP)
Allows the setting of IP characteristics beyond those set in Setup (Basic)
IP
When a mobile registers with a new base, the base may send a message to each of its neighbor to
assure that their Internet tables are up-to-date. Up to 32 neighbors can be entered. An empty or
incomplete table may cause IP routing problems when the mobile roams.
assure that their Internet tables are up-to-date. Up to 32 neighbors can be entered. An empty or
incomplete table may cause IP routing problems when the mobile roams.
Figure 23 - Advanced IP Configuration - LAN (IP)
Item
Description
Int
e
rf
a
c
e
1
(
E
TH
1
)
IP Address
Netmask
Read-only fields showing IP Address and Netmask defined earlier in Setup (Basic)
Basic IP.
Basic IP.
MTU
Ethernet Interface MTU - Default 1500.
– For optimal performance, set at 1500.
Entering a value lower than 1500 may reduce system performance. Flexibility of us-
ing lower values may be useful in testing or for particular operational conditions.
ing lower values may be useful in testing or for particular operational conditions.
Range is 576 to 1500.
MAC address
Ethernet Interface MAC address in HEX format (factory-set).
Int
e
rf
a
c
e
2
(E
TH
2
)
IP Address
Set to valid unique IP address for each individual unit.
Factory default is 192.168.203.1 for all Paragon4 units connected to their ETH2 port.
For ETH1 configuration, see Setup Basic Basic IP Configuration
Netmask
Set to valid IP netmask for each individual unit (may be same or different depending
on customer’s IP network topology).
on customer’s IP network topology).
MTU
Ethernet Interface MTU - Default 1500.
– For optimal performance, set at 1500.
Entering a value lower than 1500 may reduce system performance. Flexibility of us-
ing lower values may be useful in testing or for particular operational conditions.
ing lower values may be useful in testing or for particular operational conditions.
Range is 576 to 1500.
MAC address
Ethernet Interface MAC address in HEX format (factory-set).
N
e
ighbo
ri
ng
B
a
s
e
s
Add
Type in the “Neighboring Bases” field the IP address in dot decimal format of the
base to be added to the neighboring “Base List” table.
base to be added to the neighboring “Base List” table.
Delete
Type in the “Neighboring Bases” field the IP address in dot decimal format of the
base to be deleted from the neighboring “Base List” table.
base to be deleted from the neighboring “Base List” table.
Base List
Read-only listing. Dynamic window expands downward as needed to show all ad-
dresses added to the list or shrinks as addresses are removed.
Shows “Table is empty” if no address is present in the Base List.
dresses added to the list or shrinks as addresses are removed.
Shows “Table is empty” if no address is present in the Base List.