Справочник Пользователя для CALAMP WIRELESS NETWORKS INC. BDP4-EXCT769
001-2019-500 Rev 0
Paragon4 – UHF, 700 & 800MHz User Manual
71
6.10.2
Statistics ► Performance
Figure 65 - Statistics - System Performance
Item
Description
Number of Mobiles
Registered: Records the maximum number of mobiles registered at
any time over the statistics period
Active: Records the number of mobiles that have actively transmitted
or received data during the statistics period. This value can be larger
than the number of Registered mobiles for a period if enough mobiles
have registered and then roamed away from the base during the statis-
tic period.
any time over the statistics period
Active: Records the number of mobiles that have actively transmitted
or received data during the statistics period. This value can be larger
than the number of Registered mobiles for a period if enough mobiles
have registered and then roamed away from the base during the statis-
tic period.
Channel Throughput
Outbound: Records the number of data packets sent outbound during
the statistics period. The number of packets sent so far during the
Current period is shown, as is the Largest value recorded for any pe-
riod.
Inbound: Records the number of data packets scheduled for inbound
during the statistics period. The number of packets scheduled so far
during the Current period is shown, as is the Largest value recorded
for any period. (The number of packets scheduled may not match the
number of packets actually received. See
the statistics period. The number of packets sent so far during the
Current period is shown, as is the Largest value recorded for any pe-
riod.
Inbound: Records the number of data packets scheduled for inbound
during the statistics period. The number of packets scheduled so far
during the Current period is shown, as is the Largest value recorded
for any period. (The number of packets scheduled may not match the
number of packets actually received. See
Statistics → Interfaces page
for counts of the number of packets received.
The Clear 'Largest' Stats button clears the two values in the Largest
column. The Largest values can be used to compare the current set of
statistics with the busiest outbound & inbound periods.
The Clear 'Largest' Stats button clears the two values in the Largest
column. The Largest values can be used to compare the current set of
statistics with the busiest outbound & inbound periods.
Average Outbound Delivery Time
Records the average time from which an outbound IP message is pre-
sented to the airlink until the RF acknowledgement for that message is
received. Broadcast/Multicast messages that are not acknowledged do
not contribute to the statistic, nor are outbound messages that retry
and fail to reach their destination mobile.
An increasing Average Outbound Delivery Time is usually an indica-
tion of increasing traffic on the RF channel but Delivery Time can also
be affected by an increase in the number of retries needed to reach
distant mobiles.
Note: The Average Delivery time for each registered mobile is also
available on the Remote Table page.
sented to the airlink until the RF acknowledgement for that message is
received. Broadcast/Multicast messages that are not acknowledged do
not contribute to the statistic, nor are outbound messages that retry
and fail to reach their destination mobile.
An increasing Average Outbound Delivery Time is usually an indica-
tion of increasing traffic on the RF channel but Delivery Time can also
be affected by an increase in the number of retries needed to reach
distant mobiles.
Note: The Average Delivery time for each registered mobile is also
available on the Remote Table page.