Справочник Пользователя для USA Alinco Branch DR-135T
21
6 . P a r a m e t e r S e t t i n g M o d e
By entering the Parameter Setting mode, some of the radio’s operating parameters can be changed
to suit your application. The following is the Selectable Parameters’ Menu.
to suit your application. The following is the Selectable Parameters’ Menu.
IMPORTANT: Please read following pages thoroughly prior to the change of any parameters. THE PARAM-
ETERS CANNOT BE SET WITHOUT ENTERING THE SET MODE.
Note:
The Alphanumeric Channel Tag setting will not appear in the menu until memories have been programmed
first!
Default setting
To use the Parameter Setting mode
1.
Press FUNC key for more than 2 seconds to
enter the Parameter Setting mode.
Use SQL key or UP/DOWN keys to select
menu.
enter the Parameter Setting mode.
Use SQL key or UP/DOWN keys to select
menu.
2.
Rotate the main dial to select the desired set-
ting.
ting.
3.
Press SQL or UP/DOWN keys again to enter
the selected setting into the radio’s memory. The
transceiver is now ready for additional Param-
eter adjustments.
the selected setting into the radio’s memory. The
transceiver is now ready for additional Param-
eter adjustments.
4.
Press any key OTHER than SQL/UP/DOWN
to exit the Parameter mode. The only excep-
tion is Channel Tag setting which accepts only
PTT, FUNC, MHz and TS/DCS keys to exit.
to exit the Parameter mode. The only excep-
tion is Channel Tag setting which accepts only
PTT, FUNC, MHz and TS/DCS keys to exit.
Details of the features in Menu
Please refer to “Parameter Setting Mode” for setting op-
erations. The operation procedures of some of the fea-
tures are explained later in detail.
erations. The operation procedures of some of the fea-
tures are explained later in detail.
STP-5
Channel Step setting
TIMER
Scan type (time scan/busy scan)
BEEP-ON
Beep sound ON/OFF
TOT-OFF
Time-Out-Timer ON/OFF
TP-OFF
TOT penalty ON/OFF
APO-OFF
Auto-Power-Off ON/OFF
TB-1750
Tone-Burst Frequency setting
BCLO-OF
Busy-Channel-Lock-Out ON/OFF
SCR-OFF
Theft Alarm ON/OFF
A
Alphanumeric Channel Tag setting
LAMP-H
Dimmer (LCD illumination) High/Low
Parameters Setting Mode