Справочник Пользователя для VTech Telecommunications Ltd 80-7264-01

Bluetooth

Base name:
VTech DS6311
PIN:0000

Pair a cell phone (continued)

Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process.
When a device is successfully connected, the handset
displays Paired with cellular and then Cellular setup
completed Device connected. The corresponding
status icon (

1 or

2) displays. The corresponding

device light on the telephone base (DEVICE1 or
DEVICE2) turns on.

When you already have two devices on the active
devices list, the handset shows Maximum of 2
devices can be connected. You are prompted to
replace an existing device on the active devices list
(page 21).

If you have trouble pairing your cell phone, it may not be compatible
with your DS6311. Check the Bluetooth compatibility list at
www.vtechphones.com.

Auto connection

When a device is successfully paired with the telephone
base but not connected, the handset displays Cellular
setup completed Device not connected and then Auto-
connect function enabled Press SELECT.
You can press

MENU

/SELECT to exit. You can connect a

device manually (page 20).

•

The pairing process may take up to one minute. If the pairing process fails,

try again.

The steps for the pairing process may vary for different cell phones. If

this happens, follow the prompts on your cell phone and your DS6311 to
complete the pairing process.

If you put the handset back in the telephone base or charger while pairing,

the process discontinues and the handset returns to idle mode.

•

Auto-connect
function
enabled

Press

SELECT

Cellular setup

completed

Device

connected

Cellular setup

completed

Device not

connected