Справочник Пользователя для VTech Telecommunications Ltd 80-7812-01

PC mode

Operation

33

In order to make and receive calls through your computer, 
connect the headset base to your computer using the USB cable 
(see page 7).

In idle mode, press the PC button on the headset 
base to activate it for use with your computer. The 
PC light turns on. 

Configure the audio settings in your VoIP software to use your
"AT&T DECT Headset". Make sure the volumes of the microphone 
and speaker are turned on and set to an audible level through 
your computer audio settings and in some VoIP calling software.

You may also need to configure the default audio settings 
of your computer if you would like to use another device for 
playback and recording at the same time as your headset. For 
example, you can listen to music through your speakers while 
you are having a phone conversation using your headset. For 
detailed instructions on how to configure the audio settings for 
various operating systems, refer to the Troubleshooting section 
on pages 45-47.

Use your VoIP software to make new calls or answer incoming 
calls as you normally would. Your headset should transmit and 
receive all audio to and from your VoIP program. Press 

to use 

your headset for calls in PC mode. While it receives an incoming 
call, you hear two low beeps from the headset.