Справочник Пользователя для Itron Inc. 100WA

Installing the 100W-R and 100WP-R Endpoints

TDC-0951-001 100W-R and 100WP-R Datalogging Water Endpoint Installation Guide

Proprietary and Confidential

To mount the 100W-R and 100WP-R endpoints on the adapter plate

1. Locate the two 1-inch endpoint mounting screws in the Pipe Mount Kit.

2. Slide the endpoint back cover onto the adapter, pushing up to secure the lug adapter in the lug slot.

3. Install the two 1-inch endpoint mounting screws.

4. Tighten the screws to 9 to 12 inch-pounds of torque.

To install tamper seals and cable ties

1. Using the two new tamper seals from the mounting kit, place a new tamper seal over each endpoint

mounting screw.

2. Push both tamper seals all the way into place with a 1/4-inch nut driver or similar tool.