Справочник Пользователя для DEI Headquarters Inc. DEI7141

Compatible with the 
following systems:

 

The following Learn Routine can be used to program this replacement transmitter to the system. In order to enter 

the Learn Routine, the system’s Valet/Program switch must be plugged into the BLUE port.

1. 

Door. Open a door.

2. 

Key. Turn the key to the ON position. 

3. 

Choose. Within 5 seconds press and release the 

Valet/Program button the number of times corre-

sponding to the desired channel listed below. 

Once you have selected the channel, press the 

Valet/Program button once more and hold it. The 

LED will flash the same number of times as the 

channel selected and the siren (if connected) will 

chirp to confirm the selected channel. Do NOT 

release the button.

4. 

Transmit. While holding the Valet/program 

button, press the button from the transmitter you 

wish to assign to that channel. The unit will chirp 

(if horn or siren connected) to confirm that the 

transmitter has been taught to the receiver 

5. 

Release. Once the code is learned you can release 

the Valet/Program button and remove the key.

 

1 

7 

Auto-learn Standard Configuration

 

2 

8 

Auto-learn Single-Button Configuration

 11 

9 

Delete 

All 

Transmitters

A remote that has been programmed to an standard 
configuration will use separate buttons for arm and 
disarm similar to a factory keyless entry. Using the 
expanded configuration, the transmitter buttons are 
assigned to the following functions:

The lock icon button arms and locks the system.

The unlock icon button disarms and unlocks the 
system.

The AUX icon button operates channel 2.

The siren (or star) icon button operates Panic only.

When pressed together, the lock and unlock (or 
star) icon buttons operate channel 3.

P Button (on the back of the transmitter)
Used to enter the Transmitter's programming menu. 
(See Security/ Remote Start manual for details).

This device complies with Part 15 of FCC rules. 
Operation is subject to the following conditions: (1) 
This device may not cause harmful interference, 
and (2) This device must accept any interference 
received, including interference that may cause unde-
sired operation.

CAUTION! Changes or modifications not expressly 
approved by the party responsible for compliance could 
void the user's authority to operate this device.

MADE IN TAIWAN

© 2006 Directed Electronics, Vista CA 92081

All rights reserved.

P/N 7141P  10-06

Python 1-Way Transmitter