Справочник Пользователя для DEI Headquarters Inc. HYU1800

 

After gaining access to the BCM, unplug it and remove it (this will give you more room to work). The center plug (M04-B) is 
where you’ll find the third interrupt. The wire is red/black and is found in pin number 8 of the 20 pin connector. Cut it and 

attach pin 87a of the external relay (provided in the kit) to the BCM side of the cut (red/black) wire. Attach pin 30 of the 
relay to the vehicle side of the cut (red/black) wire. Pin 85 of the relay will get attached to the grey/light blue wire on the 

remote starter’s three pin side connector. Pin 86 of the relay will get attached to one of the two (constant) 12v wires on the 
large 6 pin (T) harness. Please see pictures below.