Справочник Пользователя для DEI Headquarters Inc. HYU1800
Page-7
PREPARATION
Panel removal
Completely remove the driver’s running board (Picture A) and driver’s kick panel. You must first remove the hood release
handle by unscrewing the Philips screw in the centre part and lightly pulling on the handle (Pictures B and C).
Picture A
Picture B
Picture C
Remove the crash panel side cover (Picture D); unscrew the four (4) Philips screws (Pictures E, F). Pull lightly on the
panel, making sure to disconnect the data link and other control switch connectors on the lower dash (Pictures G and H).
panel, making sure to disconnect the data link and other control switch connectors on the lower dash (Pictures G and H).
Unscrew the 5X 10 mm bolts retaining the metal crash bolster (Picture I).
Picture D
Picture E
Picture F
Picture G
Picture H
Picture I