Справочник Пользователя для Ione SCORPIUSP20MTU

 

Step 4: The LED on the dongle receiver will blink very fast for 3 seconds. This means 

that ID setting is completed.   

       
Note: If the Wireless Keyboard does not work properly, please go back to step 2. 
 
Reminder: For optimal performance, please place the dongle receiver 20cm away 
from other RF interference devices such as computer monitors and speakers. 
 
Now, Enjoy and Have a Fun!!! 
 
TROUBLE SHOOTING GUIDE 

Keyboard or cursor 
doesn’t function at all 

•  Make sure that batteries have sufficient power level. 
•  Follow the steps of ID setting to connect wireless 

keyboard and receiver again. 

The LED on RF receiver 
or keyboard does not 
blink if you move the 
trackball or press keys 
on keyboard 

•  Ensure computer is powered on and receiver is connected 

to the USB port of computer. 

•  Make sure that batteries have sufficient power level. 
•  Unplug the receiver and plug it in again. 
•  Follow the steps of ID setting to connect wireless 

keyboard and receiver again. 

•  Make sure the operation distance is within 10 meters. 

Keyboard or cursor 
doesn’t function 
properly  
 

z

  If you press a key and the ‘transmitter’ LED on the 

keyboard does not blink, it could be ID lost or keyboard is 
beyond RF operation range. 

z

  Please reposition the keyboard until the LED resumes. 

z

  If the problem persists, please go to ID setting procedure to 

reset ID. 

Battery low RED LED 
is lighted 

z

  Use the charging cable to connect K/B and receiver for 

battery charging.