Справочник Пользователя для B+B SmartWorx THINQ1
Quatech SDS User’s Manual
Introduction
Getting started
Unpacking your SDS
Follow these steps to unpack your SDS.
Step
Procedure
Description
Step 1
Remove the SDS from the box.
Step 2
Remove all packing material from the SDS. Save the packaging in case you ever need
to store the unit or return it to Quatech
for service.
Step 3
Check the contents of the package to make
sure you have received everything listed
sure you have received everything listed
below:
¾
SDS
¾
Power cable
¾
Power source
¾
Ethernet crossover cable
¾
Loopback connector(s)
¾
CD-ROM containing the SDS device
drivers and configuration software
¾
QuickStart guide
The complete SDS package ships in a
single box.
single box.
Note: Crossover cables only ship with the
QSE-100 and ESE-100 models.
QSE-100 and ESE-100 models.
Step 4
Check the SDS and accessories for shipping
damage.
Pay particular attention to the SDS’ case
and port connectors. If anything is
missing or damaged, contact your
Quatech sales representative.
Quatech sales representative.
March 2005
940-0183-151
Page 7