Справочник Пользователя для B+B SmartWorx WLNG1
Set up the All-in-One
16
Fit the hand mount
IMPORTANT:
Remove all jewelry from your wrist and hand before fitting the All-in-One.
1.
Loosen the finger strap by detaching the fastener ends and then rotating the buckles outward
so that the strap can slip freely through the buckles.
so that the strap can slip freely through the buckles.
2.
Center the rubberized portion of the finger strap between the buckles.
3.
Loosen the wrist strap by releasing the fastener ends and pulling the straps through the
buckles.
buckles.
4.
Slide your hand through the wrist strap, palm away from the All-in-One.
5.
Insert pointer and middle fingers under the finger strap with the rudder positioned between the
two fingers.
two fingers.
6.
Slide the All-in-One onto your hand until the finger strap is at the base of your fingers, and the
wrist strap is at the wrist.
wrist strap is at the wrist.