Справочник Пользователя для Digital Security Controls Ltd. 17TL280LER
OFF: Visual verification is disabled.
[3] Video On Demand. Default (OFF)
ON: Video On Demand is enabled.
OFF: Video On Demand is disabled.
OFF: Video On Demand is disabled.
[4] Reserved.
[5] Reserved.
[6] Reserved.
[7] Reserved.
[8] Reserved.
[5] Reserved.
[6] Reserved.
[7] Reserved.
[8] Reserved.
[011] Installer Code
Default (CAFE)
Program the installer code for the communicator module. The installer code will be required when pro-
gramming the communicator module. Valid range: 0000 - FFFF.
Default (CAFE)
Program the installer code for the communicator module. The installer code will be required when pro-
gramming the communicator module. Valid range: 0000 - FFFF.
[012] DLS Incoming Port
Default (0BF6/3062)
The DLS incoming local port (listening port) is the port DLS IV will use when connecting to the com-
municator. If a router or gateway is used, it must be programmed with a transmission control protocol
(TCP) port forward for this port to the communicator module IP address. Valid range: 0000 - FFFF.
Default (0BF6/3062)
The DLS incoming local port (listening port) is the port DLS IV will use when connecting to the com-
municator. If a router or gateway is used, it must be programmed with a transmission control protocol
(TCP) port forward for this port to the communicator module IP address. Valid range: 0000 - FFFF.
[013] DLS Outgoing Port
Default (0BFA/3066)
The DLS outgoing port is used for outgoing sessions to DLS IV after an SMS request has been sent to
the communicator. Use this section to set the value of the local outgoing port. The value must be changed
if the communicator is located behind a firewall and must be assigned a particular port number, as
determined by the network administrator. In most cases, changing the default value or configuring the
firewall with this port is not required.
Valid range: 0000-FFFF.
NOTE: If section [006] toggle option [7] is ON, DLS will use the primary path for session. If section [006]
Default (0BFA/3066)
The DLS outgoing port is used for outgoing sessions to DLS IV after an SMS request has been sent to
the communicator. Use this section to set the value of the local outgoing port. The value must be changed
if the communicator is located behind a firewall and must be assigned a particular port number, as
determined by the network administrator. In most cases, changing the default value or configuring the
firewall with this port is not required.
Valid range: 0000-FFFF.
NOTE: If section [006] toggle option [7] is ON, DLS will use the primary path for session. If section [006]
toggle option [7] is OFF, DLS will use the Ethernet path, if available.
[015] DLS Call-Up IP
Default (000.000.000.000)
Default (000.000.000.000)
[016] DLS Call-Up Port
Default (0000)
Default (0000)
[020] Time Zone
Default (00)
Please refer to the panel manual section ‘Real- Time Clock’ for more details. Use Column 2 (Offset
Hours) to find the local Time Zone. Record the two digit HEX value from Column 1 (HEX Value) on the
same row. Program this HEX value for the Time Zone. Valid range is 00 - FF.
Default (00)
Please refer to the panel manual section ‘Real- Time Clock’ for more details. Use Column 2 (Offset
Hours) to find the local Time Zone. Record the two digit HEX value from Column 1 (HEX Value) on the
same row. Program this HEX value for the Time Zone. Valid range is 00 - FF.
Table 8: World Wide Time Zone
HEX
Value
Offset
Hours
Hours
Standard
Abbreviation
Location
01
-12
BIT
Baker Island Time
05
-11
SST
Somoa Standard Time
09
-10
HAST
Hawaii-Aleutian Standard Time
0B
-9.5
MIT
Marquesas Island Time
0D
-9
AKST
Alaska Standard Time
11
-8
PST
Pacific Standard Time
15
-7
MST
Mountain Standard Time
19
-6
CST
Central Standard Time
1D
-5
EST
Eastern Standard Time
1F
-4.5
VST
Venezuela Standard Time
21
-4
AST
Atlantic Standard Time
21