Справочник Пользователя для Unison Electric Co Ltd FPD1520
- 13 -
•Troubleshooting
Blank Screen
After installing the power adapter and connecting I/O cable to a PC, the monitor display a blank screen.
• Press soft power button. Check if power LED is lit.
• If LED turns green, check PC has been powered on. Check all cables are connected.
• If LED turns orange, check if PC is in the power saving mode, by pressing any keys on the keyboard.
• Press soft power button. Check if power LED is lit.
• If LED turns green, check PC has been powered on. Check all cables are connected.
• If LED turns orange, check if PC is in the power saving mode, by pressing any keys on the keyboard.
Rolling Screen
• Change PC display resolution to 1024x768 at 60hz. Refer to video card manual.
• Unplug power adapter to monitor, then plug it back.
• Press monitor power button again.
• Recall factory setting. Refer to panel controls and OSD functions in this manual.
• Press “auto” button.
• Unplug power adapter to monitor, then plug it back.
• Press monitor power button again.
• Recall factory setting. Refer to panel controls and OSD functions in this manual.
• Press “auto” button.
Unstable Screen
• Check if PC display resolution is not greater than 1024 x 768 at 85hz.
• Check if PC display resolution matches the factory preset timings.
• Check if PC display resolution matches the factory preset timings.
Change PC display resolution to 1024x768 at 60hz. Refer to video card manual.
• Recall factory setting. Refer to panel controls and OSD functions in this manual.
• Press “auto” button.
• Press “auto” button.
Screen is not perfect
• Check if PC display resolution matches the factory preset timings.
• Recall factory setting. Refer to panel controls and OSD functions in this manual.
•
• Recall factory setting. Refer to panel controls and OSD functions in this manual.
•
Fine tune the screen by the following steps, pitch, phase, and position.
Refer to OSD functions in this manual.