Справочник Пользователя для Buffalo 09101887-0
WBMR-HP-GNV2 User Manual
19
Chapter 4 - Configuration
The web-based configuration tool lets you change advanced settings for the AirStation. Don’t
change these settings unless you know what you’re doing.
change these settings unless you know what you’re doing.
How to Access the Web-Based Configuration Utility
To configure the AirStation’s advanced settings manually, log in to the web-based configuration
utility as shown below.
utility as shown below.
1
2
2
3
Launch a web browser.
Enter the AirStation’s LAN-side IP address in the
address field, and press the [Enter] key.
address field, and press the [Enter] key.
Note: · The AirStation’s default LAN-side IP address is 192.168.11.1.
· If you changed the IP address of the AirStation, then use the new IP address.
When this screen appears, enter [root]
(in lower case) for the user name and the
password that you set during initial setup.
Click [OK].
(in lower case) for the user name and the
password that you set during initial setup.
Click [OK].
Note: · By default, the password is blank (not set).
· If you forget your password, hold down the
Reset button (page 10) to initialize all settings.
The password will then be blank. Note that
all other settings will also revert to their
default values.
The password will then be blank. Note that
all other settings will also revert to their
default values.