Справочник Пользователя для Buffalo 09101938-0

WCR-G300 / WCR-HP-G300 User Manual

Chapter 3 - Installation

Automatic Setup

Windows 7 / Vista / XP

The AirNavigator CD can guide you through installing your AirStation. To launch the setup program

please insert the CD into your Windows 7/Vista/XP PC and follow the instructions on the screen. If

you deactivated auto-run for CD’s please navigate to [CD drive]:\Win\ and launch ASSetWiz.exe.

Note: · To use a wireless client in Windows 7 or Vista, perform setup using the AirNavigator CD to automatically

generate a profile for wirelessly connecting to the AirStation. After setup is complete, once the LAN
cable is removed, you can connect from your wireless client to the AirStation.

· Before performing setup, enable your computer’s wireless client.

Mac OS X

For a Mac, open the Mac folder on the CD and launch the AirStation Configuration tool. Search and

select the Buffalo AirStation you want to set up. You can either configure the IP or open the web

interface for all settings. Please refer to “Manual Setup” in the next section.

Note: You can use the easy and simple setup via AOSS to connect the Mac wirelessly. Please press the AOSS but-

ton on the Buffalo router, start the AOSS assistant and follow the steps. The WLAN monitor in the same
folder shows the wireless status regardless which method you use to connect.

Other OS

If your computer uses a different operating system, use manual setup instead. Please refer to the

next section “Manual Setup”.