Справочник Пользователя для Buffalo 000000019
44
8
Wait for about 30 seconds, then check the LEDs on the side of the print server.
Switch from Wireless to Wired Connection
Follow the procedure below to switch wireless connection to wired connection. The print server cannot use both wired
and wireless connection at the same time.
Before starting, check that the connection method is ‘Auto’.
and wireless connection at the same time.
Before starting, check that the connection method is ‘Auto’.
1
Disconnect the AC adapter from the print server.
2
Connect the print server to the router or hub with an Ethernet cable.
3
Connect the AC adapter to the print server.
4
Wait for about 30 seconds, then check the LEDs on the side of the print server.