Справочник Пользователя для Monterey International Corporation 46AR13

K7903G516_US_front_A

K7903G516_US_back_A

1. Package Contents :

RF Keyboard & Mouse Combo

Function :

3. Installation :

2. Install the Batteries :

QUICK GUIDE

OFF

Wireless RF Keyboard & Mouse not detected
If the Keyboard & Mouse don't respond to activity, follow this steps :

(1) Ensure that the receiver cable is properly connect to the USB ports.

(2) Ensure that the batteries have been installed correctly.

(3) Ensure that you have established a connection between the RF receiver, the

mouse and the keyboard.

If the RF Keyboard & Mouse don't respond to activity after replacing. The

batteries, follow these steps :

(1) Ensure that the batteries have been installed correctly.

(2) Ensure that the batteries are not discharged.

(3) Ensure that you have established a connection between the RF receiver, the

mouse and the keyboard.

This device complies with part 15 of the FCC rules. Operation is subject to the

following

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, Including interference

that may cause undesired operation.

Federal Communications Commission Requirements. The equipment has been

tested and found to comply with the limits for Class B Digital Device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction, may cause harmful

interfernce to radio communication. However, there is no guarantee that

interference will not occur in a particular installatin.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turnung the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures :
˙Reorient of relocate the receiving antenna.

˙Increase the separation between the equipment and receiver.

˙Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

The changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

(a) When battery is running out of electric capacity. LED will

　 start flashing in order to indicate user that the capacity is

　 empty.

　 (1) Mouse

　 (2) Keyboard

(b) Power Switch :

　 (1) You can turn ON / OFF the power of Mouse by this

　　 power swith as you want to extend the batteries' life.

Turn ON the computer.

Connect the receiver to the PC via USB port.

B) ID Select Important :
ID connect for Keyboard & Mouse
Plug-in the receiver. the LED on receiver will flash for 30
seconds. Press ID button on Keyboard or Mouse within
30 seconds. When ID matched, the LED will stop
flashing. Then the Device could work.

(a) Keyboard

(b) Mouse

(1) Keyboard

(2) Mouse　　(3) Receiver　　(4) Battery

Specification :

(1) Input Voltage : DC 3V(min).
(2) Power Consumption : Keyboard : 3 mA (max),
Mouse : 16 mA (max).
(3) Available Distance : 10 m(max).
(4) Characters per Inch : 1000 CPI.
(5) Wireless RF : 2.4 GHz.
(6) System Requirements : Windows 7 / Vista / XP / 2000.

Troubleshooting :

Specification :

(1) Input Voltage : DC 3V(min).
(2) Power Consumption : Keyboard : 3 mA (max),
Mouse : 8 mA (max).
(3) Available Distance : 10 m(max).
(4) Characters per Inch : 1000 CPI.
(5) Wireless RF : 2.4 GHz.
(6) System Requirements : Windows 7 / Vista / XP / 2000.

1.5V / AAAx2

ID Connect Button

ID Connect button

OFF