Справочник Пользователя для Wulfsberg Electronics Division CVC-151

 

Page 60 

Publication No. 150-047012 

Dec 2005 

Rev. D 

1.  Set the MODE SELECTOR to ON. 

2.  If the code displayed is not the one desired, rotate the CURSOR CONTROL until the ATC Code 

surrounds CURSOR BOX.  Rotate the right inner knob to adjust the lower two digits from 00-77. Rotate 
the right outer knob to adjust the upper two digits from 00-77. 

3.  If the VFR code is desired press and hold the right pushbutton until “1200” is displayed. 

4.  To enable Altitude Reporting on aircraft equipped with an optional digitizing pressure encoder rotate the 

MODE SELECTOR to ALT. 

5.  If it becomes necessary to suppress all replies from the ATC ground station, rotate the MODE 

SELECTOR to SBY.