Справочник Пользователя для KYE Systems Corp GMZH4
BT Mouse:
Hardware Installation
Note: Before installing or removing the mouse (either the original or the wireless one) to or
from your computer, always remember to turn off your computer. Installing or removing
the mouse when your computer is running will cause permanent damage to them or
your computer.
the mouse when your computer is running will cause permanent damage to them or
your computer.
1.
Press the tab on the bottom of the wireless mouse.
2.
Press the latch then slide the cover off the wireless mouse.
3.
Insert 2 AAA batteries into the battery compartment. Pay attention to the polarity.
A diagram in the battery compartment shows the correct battery installation.
A diagram in the battery compartment shows the correct battery installation.
4.
Replace the covers to the wireless mouse until a click is heard.
Warning
1. Do not use your wireless keyboard or mouse on a metal surface. Use a pad to
prevent the radio channel from being interfering.
2. For optimal performance, place the dongle receiver at least 8 inches (about 20cm)
away from the wireless mouse and other electrical devices, such as computer,
monitor, etc.
monitor, etc.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.