Справочник Пользователя для KYE Systems Corp GMZKI
ENGLISH
2
3. System Requirements
x Optical DVD drive
x USB
x USB
Port
x Win Vista (SP1 or higher) / Win XP (SP2 or higher) (does not support touch function)
x Win8
x Win8
/
Win7
4. Driver Installation
For Microsoft Windows 8, 7, Vista, and XP:
1. Insert the CD into the CD-ROM drive, and wait for the main installation screen to appear.
2. The main installation screen should appear automatically, or you can manually start the
installation by opening
ᇻ
ᇻ My Computer ᇼ ► ᇻ CD/DVD Rom ᇼ ► then click on the
ᇻSetupᇼprogram.
When installing the driver, follow the installation instructions on screen and press the “Enter” key.
After the installation has been completed, reboot the computer.
5. Hardware Installation
Connect the tablet to the USB interface of the PC after
the driver installation is finished and you have restarted
Windows:
After you connect a pen tablet into the PC, you will see a
the driver installation is finished and you have restarted
Windows:
After you connect a pen tablet into the PC, you will see a
small tablet icon (
)
appear in the system tray, which is
normally at the lower right corner of the screen.
Install the driver first before you plug the tablet into
your PC.
Install the driver first before you plug the tablet into
your PC.
6. Verifying Hardware and Driver Functions
Follow these steps to verify the tablet is installed properly:
The LED indicator on the graphic tablet indicates the status of operation.
It may be located at
a different place than shown in the above diagram. This LED normally stays off, and will only
turn on or off in response to various conditions. Watch the state of the LED on the tablet as
you go through these test steps:
turn on or off in response to various conditions. Watch the state of the LED on the tablet as
you go through these test steps:
1. When you put your fingertip(s) on the working area of tablet, the LED will stay on. The tablet
will automatically detect your fingertip(s) or the digital pen, you can only use one method while
working. The digital pen is set as the priority input tool when the gesture function is enabled.
working. The digital pen is set as the priority input tool when the gesture function is enabled.
2. Tap on any surface with the tip of the pen, or press the left button of the mouse, to “wake it
up” if it has gone into standby mode. A built-in power saving function may have forced the pen
or mouse into the standby mode if either of them has not been used for a period of time.
or mouse into the standby mode if either of them has not been used for a period of time.
3. As soon as the pen tablet itself activates, the LED will be light briefly, and will then go and
stay off again.