Справочник Пользователя для Entrust Datacard Corporation Q10075
Page 21
Cleaning the printer
Run a cleaning card and change the cleaning sleeve when changing
the print ribbon. Make sure that all cards sent to the printer have
completed printing before cleaning.
the print ribbon. Make sure that all cards sent to the printer have
completed printing before cleaning.
1
Open the printer cover and remove the ribbon cartridge.
2
Remove the cleaning roller.
3
Open the input hopper cover.
4
Remove unprinted cards from the input hopper (1).
5
Open the Printer Toolbox (if needed, see
).
6
Click the Clean Printer button. A prompt to insert the cleaning card
appears.
appears.
7
Open the cleaning card package and remove the cleaning card.
8
Insert the cleaning card into the input hopper (2), just past the roller.
9
Click OK on the message box. The printer moves the card through the
printer several times and ejects the card. Wait a few minutes to allow
the rollers to dry.
printer several times and ejects the card. Wait a few minutes to allow
the rollers to dry.
10 Slide the used cleaning sleeve off the spindle.
Clean
Printer
Button
Printer
Button