Справочник Пользователя для Entrust Datacard Corporation Q10075
Page 1
About the printer
This guide applies to the SP75 printer.
The outside of the printer
Printer Cover.
Latch: Lift the latch to open the printer cover.
Locks: Optional locks secure supplies.
Input Hopper: Open the cover to load blank cards.
LCD Panel: Shows the printer status and any
messages. Use it to change network settings.
messages. Use it to change network settings.
Ready Key: Push to pause or resume the printer.
The Status Light helps you understand printer
operation. See
operation. See
for details.
Card out slot: Cards removed from the print area
(using the manual advance knob) exit here.
(using the manual advance knob) exit here.
Laminator Advance Knob: Moves cards in the
laminator area.
laminator area.
Output Hopper: Remove completed cards.
Laminators: All SP75 printers have an L1 laminator.
Some also have an L2 laminator. They apply topcoat
or patch material to cards.
Some also have an L2 laminator. They apply topcoat
or patch material to cards.
L1
L2