Справочник Пользователя для Psion Inc HFAM1

April 8, 2005 

DPD A00067 A20    Sheet 2 of 4 

 

•  Remove and discard the two screws on the top of the metal frame. 

 

 

 

•  Slide the RFID Antenna HF-A2 under the metal frame (with the spiral pattern facing up). 

 

•  Connect the RFID Antenna HF-A2 to the RFID Coupler HF-AM1. 

 

•  Use two new screws (M2 x 12mm) provided to secure the antenna on the metal frame. 

 

 

 

•  Slide the SW1401 switch to the right to turn power back on. 

 

•  Replace the end-cap, back plate and batteries. 

 

For detailed instructions, pleased refer to the WORKABOUT PRO Hand-Held Computer User Manual and 
to the RFID MODULE HF-AM1-A2 User manual. These manuals are available on our website 

www.psionteklogix.com

 through the Teknet extranet