Справочник Пользователя для Psion Inc PX750BT
Chapter 7: Peripheral Devices & Accessories
Charging A Battery Installed In The Warrington
Charging A Battery Installed In The Warrington
188
Warrington Hand-Held Computer User Manual
Figure 7.3 Back Of Desktop Docking Station
7.5.1
Charging A Battery Installed In The Warrington
•
Insert the DC power cable to the DC IN port on the desktop docking station. Plug the
pronged end of the cable into an AC outlet.
pronged end of the cable into an AC outlet.
•
Slide the Warrington into the docking station, making certain that the LIF (Low Inser-
tion Force) port on base of the hand-held is securely seated on the docking station
connector pins. An icon is displayed briefly in the navigation bar at the top of the hand-
held screen indicating that the unit is properly installed in the station:
tion Force) port on base of the hand-held is securely seated on the docking station
connector pins. An icon is displayed briefly in the navigation bar at the top of the hand-
held screen indicating that the unit is properly installed in the station:
This icon is only displayed when the unit is switched on.
The LED on the Warrington lights up indicating that the unit has external power and battery
charging will begin. It is safe to leave the unit in the desktop docking station while it is not in
use—the battery will not be overcharged.
charging will begin. It is safe to leave the unit in the desktop docking station while it is not in
use—the battery will not be overcharged.
Important: This docking station can only be used to charge Psion Teklogix approved
Lithium-Ion batteries.
Preliminary Draft