Справочник Пользователя для ViewSonic Corporation VS10276
ViewSonic Wireless Router
16
2
If requested by your ISP (usually cable ISPs), complete the
Host Name and Domain Name fields. Otherwise, leave them
blank. Click the down arrow next to the Connection Type
field. A drop-down menu appears with several connection types
as described below. Select a Connection Type. The Primary
Setup screen offers different features depending on the
connection type you select. Click Apply.
Host Name and Domain Name fields. Otherwise, leave them
blank. Click the down arrow next to the Connection Type
field. A drop-down menu appears with several connection types
as described below. Select a Connection Type. The Primary
Setup screen offers different features depending on the
connection type you select. Click Apply.
Connection Type:
Automatic Configuration - DHCP. If you are connecting
through DHCP or a dynamic IP address from your ISP, keep
this default setting.
this default setting.
Static IP. If your ISP assigns you a static IP address, select
Static IP from the drop-down menu. Complete the Internet IP
Address, Subnet Mask, Default Gateway, and DNS fields.
Enter at least one DNS address.
Address, Subnet Mask, Default Gateway, and DNS fields.
Enter at least one DNS address.
PPPoE. If you are connecting through PPPoE, select PPPoE
from the dropdown menu. Complete the User Name and
Password fields.
Password fields.
PPTP. PPTP is a service used in Europe only. If you are using a
PPTP connection, check with your ISP for the necessary setup
information.
information.