Справочник Пользователя для Arris 2247N8
47
LED Function Summary Matrix
If a status indicator light does not look correct, look for these possible problems:
Power
DSL
Internet
Unlit
No power
No signal
Not connected
Solid
Green
Power on
DSL line synched with the
DSLAM
DSLAM
Connected to the Internet
Flashing
Green
N/A
Activity on the DSL cable
Transmitting or receiving
data on the WAN port
data on the WAN port
Solid
Red
System malfunction
N/A
N/A
Flashing
Red
Updating embedded soft-
ware
ware
N/A
N/A
Ethernet 1, 2, 3, 4
WPS
Wireless
Unlit
No signal
No wireless signal
No wireless signal
Solid
Green
Synched with Ethernet
card
card
WPS exchange with
client is successful
client is successful
N/A
Flashing
Green
Activity on the Ethernet
cable
cable
N/A
Activity on the wireless
LAN
LAN
Solid
Red
N/A
N/A
N/A
Flashing
Red
N/A
N/A
N/A
If LED is
not Lit
Possible problems
Power
◆
Make sure the power switch is in the ON position.
◆
Make sure the power adapter is plugged into the DSL Gateway properly.
◆
Try a known good wall outlet.
◆
Replace the power supply and/or unit.
DSL
◆
Make sure that any telephone has a microfilter installed.
◆
Make sure that you are using the correct cable. The DSL cable is the thinner stan-
dard telephone cable.
dard telephone cable.
◆
Make sure the DSL cable is plugged into the correct wall jack.
◆
Make sure the DSL cable is plugged into the DSL port on the DSL Gateway.
◆
Make sure the DSL line has been activated at the central office DSLAM.
◆
Make sure the DSL Gateway is not plugged into a micro filter.