Справочник Пользователя для Fimi Srl 802130

1

ProScribe CV

The ProScribe is intended for use as Windows XP embedded powered wireless thin client touch-screen device. 

To use  your ProScribe you must have the following;

• a AC / DC power supply (24Vdc output voltage - 3,42 Adc output current)

• a wireless access point to access the corporate network or

• an Ethernet connection in case you plan to use the ProScribe on a fixed location

 

The Windows XP embedded operating system provides you all the convenience to set-up any type of thin-client session  

with centrally located applications or web-based services. Before doing so, please make sure to apply the following  

 

instructions.

 

 

 

The ProScribe is pre-configured with a Windows XPe feature called Enhanced Write Filter (EWF) to prevent

 

 

writing on the CF card. When write protection is activated, all recently installed software products and changed  

 

 

user settings are not stored into the CF and hence are removed after a reboot. The procedure to save such data in  

the CF card is described hereunder. It is strongly advised to re-enable EWF after disabling it for storing user data.

EWF protects the OS but also the CF card itself.

 

 

 

 

(valid only for software release ≤ 0LBMXNF5107, 0LBMXN1F206)

• press “start” button then “Run...” and type “cmd”

• on the console window type : “ewfmgr c: - commitanddisable -live”

 

 

• wait for the command execution

• now the CF is write enable, so the modification are really stored into the CF card, meaning that modifications

 

 

  will be retained on reboot also if the CF is sets again to read only mode. 

• after applying the desired modifications, enable the EWF (reboot is required for re-enable EWF).

 

 

(valid only for software release ≥ 0LBMXNF5108, 0LBMXN1F207)

• press “start” button then “Run...” and type “ewfd”

 

 

• the ProScribe will logout and reboot automatically

• now the CF is write enable, so the modification are really stored into the CF card, meaning that modifications

 

 

  will be retained on reboot. 

• after applying the desired modifications, enable the EWF.

 

 

(valid only for software release ≤ 0LBMXNF5107, 0LBMXN1F206)

• press “start” button then “Run...” and type “cmd”

• on the console window type: ewfmgr c: -enable”

 

 

• wait for the command execution 

• reboot (it is required for EWF to be really enabled)

 

 

(valid only for software release ≥ 0LBMXNF5108, 0LBMXN1F207)

• press “start” button then “Run...” and type “ewfe”

 

 

• the ProScribe will logout and reboot automatically

• now the CF is write disable, so modification are not stored into the CF card, meaning that modifications will

 

 

  be lost on reboot.

 

 

CAUTION: (valid only for software release ≤ 0LBMXNF5107, 0LBMXN1F206)

When the pad is powered on for the first time, the pad need to be calibrated.

See par. 8.1.0 for instructions.