Справочник Пользователя для TFT Inc EAS911PLUS
G-1
APPENDIX G
GLOSSARY OF EAS911+ TERMS
TERM
EXPLANATION
Attention Signal
The former two-tone EBS signal of 853 Hz and 960 Hz.
Auto Forward
The act of automatically retransmitting or relaying an EAS message without operator intervention
whenever the EAS911+ is set to Auto Mode and the EVENT and FIPS codes of a valid received
message match those Events and FIPS codes set by the setup menu for Auto Forwarding.
whenever the EAS911+ is set to Auto Mode and the EVENT and FIPS codes of a valid received
message match those Events and FIPS codes set by the setup menu for Auto Forwarding.
Banner Mode
The normal, standby condition of the EAS911+ in which the date and time are displayed in the LCD
screen.
screen.
COM port
Communications Port, or connector, on the rear panel of the EAS911+, which connects and enables
various external devices
various external devices
Duration
The valid time period of an EAS event, e.g. "A tornado watch for the next 3 hours." In this case, "3
hours" is the duration.
hours" is the duration.
EAS
Emergency Alert System or the originator field code for a broadcast station or cable system in an
EAS message
EAS message
EOM
End-of-Message; the FSK signal ("nnnn") sent at the end of an EAS message
FIPS
Federal Information Processing Identifier, a unique five-digit number for every county, parish,
borough, or census district in the US and its possessions
borough, or census district in the US and its possessions
Header
The fields of the EAS protocol: sync, ORG, EVENT, LOCATION (FIPSs), Duration, Date/Time
Stamp, and Station ID; the FSK signal that consists of the header
Stamp, and Station ID; the FSK signal that consists of the header
LCD Liquid
Crystal
Display
Mode
The state of operation of the EAS911+, i.e. Manual Forward Mode or Automatic Forward Mode
NOAA
National Oceanagraphic and Atmospheric Administration, a branch of the Commerce
Department
ORG
Originator, field in an EAS message, e.g. WXR-National Weather Service, CIV-Civil Authority
Password
The 3-digit number that must be entered after pressing the "PASSWORD" key to gain operator or
setup access to the EAS911+
setup access to the EAS911+
PCB Printed
Circuit
Board
Primary Password
The 3-digit code used by the station operator.
Ready Mode
(same as Banner Mode)
RS-485
An EIA electrical interface standard that is used for connections between the EAS911+ and an EAS
941A Remote Control/Status Module
941A Remote Control/Status Module
Setup Password
The 3-digit code used by the station owner/manager/engineer to setup and change the basic
operation of the EAS911+
operation of the EAS911+
Station ID
The call sign of the broadcast station at which this EAS911+ is located, e.g. "KTFT/AM"; the cable
system identifier, e.g. "CA0233 ".
system identifier, e.g. "CA0233 ".
Subdivision
One-ninth parts of a county, parish, borough, or census district or US possession
SAME
Specific Area Message Encoding