Справочник Пользователя для Toshiba TEC Corporation HTK10
User manual HANDY TERMINAL
52
10.
Communication
10.1.
Communication Options
Handy Terminal offers several communication options including Microsoft ActiveSync and wireless
radios.
radios.
I/O Connector (Wired Communication)
The mechanical connector on the bottom panel connects the terminal to various Handy
Terminal communication peripherals that connect to a host workstation via USB (1.1 or
higher), thus enabling ActiveSync communication.
Terminal communication peripherals that connect to a host workstation via USB (1.1 or
higher), thus enabling ActiveSync communication.
For more information, see ActiveSync Communication on paragraph 10.4.
Wireless Radios (Wireless Communication)
HANDY TERMINALs can be equipped with an 802.11b/g/n and Bluetooth radio.
For more information, see Wireless Radios on paragraph 10.14.
10.2.
Installing Additional Software
Handy Terminal is shipped with the operating system, radio drivers, and custom software (CICO)
already installed. These are the default programs that install when your terminal first boots up. You
can install additional software programs on the terminal provided that the following parameters are
met:
already installed. These are the default programs that install when your terminal first boots up. You
can install additional software programs on the terminal provided that the following parameters are
met:
• The software program was created for a Windows CE device.
• The terminal has enough memory to store and run the program.
• The program has an EXE, CAB, or DLL extension.
• The terminal has enough memory to store and run the program.
• The program has an EXE, CAB, or DLL extension.
When selecting programs, verify that the program and version of the program are designed for the
Windows Embedded CE 6.0 Pro and the terminal’s processor. You can verify your processor by
tapping Start -> Settings -> Control Panel -> System -> General tab. Make a note of the
information in the Processor field.
Windows Embedded CE 6.0 Pro and the terminal’s processor. You can verify your processor by
tapping Start -> Settings -> Control Panel -> System -> General tab. Make a note of the
information in the Processor field.
To install additional software, you can use the communication options described in this chapter.
•
Adding Programs via ActiveSync
(paragraph 10.13).
•
Adding Programs from the Internet
(paragraph 10.17).
10.3.
Connecting the USB ActiveSync Cable
To facilitate USB communication between the Handy Terminal and the host workstation, you may
connect your unit to a host by using either the USB ActiveSync cable, the optional Single Slot
Docking Cradle or the optional Single Slot Ethernet Cradle. If you use the Communication Cable,
slide the cable unit onto the bottom of the terminal lining up the terminal’s I/O connector with the
cable unit’s connector.
connect your unit to a host by using either the USB ActiveSync cable, the optional Single Slot
Docking Cradle or the optional Single Slot Ethernet Cradle. If you use the Communication Cable,
slide the cable unit onto the bottom of the terminal lining up the terminal’s I/O connector with the
cable unit’s connector.