Справочник Пользователя для Philips Consumer Lifestyle DC912V37SW

21

 

The clock can be set in either 12-hour or
24-hour mode (

12HR or 24HR for example).

1

In standby mode, press and hold PROG/SET
TIME on the remote control.

2

Press VOLUME+/- to switch between 12 hour
and 24 hour display.

3

Press VOLUME+/- again to confirm.

➜

The clock digits flash on the display panel.

➜

If the clock has not been set, "

--: --" flashes

4

Press VOL UME +/- on the system (or
VOL  +/- on the remote control) to set the
hours.

5

Press PROG/SET TIME  on the remote
control again.

➜

The clock digits for the minutes flash.

6

Press VOL UME +/- on the system (or
VOL  +/- on the remote control) to set the
minutes.

7

Press PROG/SET TIME    on the remote
control to confirm the time.

●

The system can be used as an alarm clock,
whereby the TUNER (FM)/iPod/USB/CARD
(SD/MMC) is switched on at a set time (one
time operation).  The clock time needs to be set
first before the timer can be used.

●

During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.

1

In standby mode, press TIMER for more than
two seconds.

2

Press SOURCE on the system repeatedly (or
the respective source keys on the remote
control) to select the sound source.

➜

“

SELECT SOURCE” is displayed.

3

Press TIMER to confirm your desired mode.

➜

The clock digits for the hours flash.

4

Press VOL UME +/- on the system (or
VOL  +/- on the remote control) to set the
hours.

5

Press TIMER again.

➜

The clock digits for the minutes flash.

6

Press VOL UME +/- on the system (or
VOL  +/- on the remote control) to set the
minutes.

7

Press TIMER to confirm the time.

➜

The timer is now set and activated.

●

In standby or during playback, press TIMER
once on the remote control.

➜

Display shows   if activated, and disappears if

deactivated.

pg001-024_DC912_37_Eng

2/27/08, 14:46

21