Справочник Пользователя для MOTREX CO. LTD. MTXA300BA
15
Bluetooth Operation
- In case of failure of Bluetooth pairing:
* Delete items in paired list on your phone.
* Reset both phone by power off/on and the Audio Unit by ACC off/on.
- Connecting priority of Handsfree profile is higher than headset profile.
- The Headset mode does not support Caller ID, Reject call and Call Transfer.
* Delete items in paired list on your phone.
* Reset both phone by power off/on and the Audio Unit by ACC off/on.
- Connecting priority of Handsfree profile is higher than headset profile.
- The Headset mode does not support Caller ID, Reject call and Call Transfer.
6. Using the Audio Unit as a Handsfree Device
1) When there is an incoming call, it shows CALL FROM and follows with the Phone
number on the display.
2) To accept call
Press CALL button, it appears TALKING on the display.
3) To end call
To end call, press CALL END button, it appears CALL OFF on the display.
4) To reject call
To reject call, press button when ringing, it appears CALL OFF on the display.
Note:
- It does not support to display contact while talking.
- It does not support three-way calling.
1) When there is an incoming call, it shows CALL FROM and follows with the Phone
number on the display.
2) To accept call
Press CALL button, it appears TALKING on the display.
3) To end call
To end call, press CALL END button, it appears CALL OFF on the display.
4) To reject call
To reject call, press button when ringing, it appears CALL OFF on the display.
Note:
- It does not support to display contact while talking.
- It does not support three-way calling.
7. Audio Transfer Between the Audio Unit and Phone
The audio transfer function is for switching the talking from the Audio Unit to the
connected phone for private conversation.
1) Press CALL button briefly during conversation, it appears CALL TRANS on the
display. To switch back to the Audio Unit, press button again during private
conversation, then it appears CALL TRANS on the display again.
Note:
- This function might cause disconnection of Bluetooth link in some phones, but do
not worry about it, just press the CALL button during private conversation and
switch back to the Audio Unit automatically.
- The quality of calling between Cellular Phone and Audio Unit is better than
calling between one Audio Unit and another one.
The audio transfer function is for switching the talking from the Audio Unit to the
connected phone for private conversation.
1) Press CALL button briefly during conversation, it appears CALL TRANS on the
display. To switch back to the Audio Unit, press button again during private
conversation, then it appears CALL TRANS on the display again.
Note:
- This function might cause disconnection of Bluetooth link in some phones, but do
not worry about it, just press the CALL button during private conversation and
switch back to the Audio Unit automatically.
- The quality of calling between Cellular Phone and Audio Unit is better than
calling between one Audio Unit and another one.
8. Last Call number dialing
Press CALL button briefly, it appears CALL TO, then simply press CALL button once
again, it would make the last call with phone number display on LCD.
Note:
- If you are using Samsung phone, then you may need to press the CALL button one
more time to make the last call out. First press button shows phone contact list in
your phone, then second press make the last call.
Press CALL button briefly, it appears CALL TO, then simply press CALL button once
again, it would make the last call with phone number display on LCD.
Note:
- If you are using Samsung phone, then you may need to press the CALL button one
more time to make the last call out. First press button shows phone contact list in
your phone, then second press make the last call.
9. To Make a Call by Cellular Phone
1) With ignition on, and Audio Unit powered off, it will automatically power on when
you make a call by Phone or when there is an incoming call. And once the talking
finished, it power off by itself.
2) When you make a call process by Cellular Phone, it shows CALL TO and follows
TALKING once the other side answers the call.
3) When you receive a call, it shows CALL FROM and follows the the phone number
on the display.
1) With ignition on, and Audio Unit powered off, it will automatically power on when
you make a call by Phone or when there is an incoming call. And once the talking
finished, it power off by itself.
2) When you make a call process by Cellular Phone, it shows CALL TO and follows
TALKING once the other side answers the call.
3) When you receive a call, it shows CALL FROM and follows the the phone number
on the display.
16
10. To Make a Call by Audio Unit
- To Select a Number from the Phone Book
With a phone paired OK, press and hold SEL button for more than 2 seconds, it
would display NAME SCAN on the LCD, then simply turn TUNE knob to scroll
display the phone book in the paired phone. At your desired number, press CALL
button to make the call.
To exit the Phone Book, simply press SEL button once again at the NAME SCAN
mode.
- To Select a Number from the Phone Book
With a phone paired OK, press and hold SEL button for more than 2 seconds, it
would display NAME SCAN on the LCD, then simply turn TUNE knob to scroll
display the phone book in the paired phone. At your desired number, press CALL
button to make the call.
To exit the Phone Book, simply press SEL button once again at the NAME SCAN
mode.
- To Store the Phone Number into the Audio Unit
Simply press the numeral button 1~6 while Bluetooth talking to store the current
phone number into the corresponding button.
- To Recall the Stored Phone Number
With a phone paired OK, press CALL button, it would display CALL TO on the
display, then press one of the numeral buttons to dial the number which stored
in the corresponding button.
11. To Play the Bluetooth Music
The Audio Unit supports A2DP (Audio Advanced Distribution Profile) and AVRCP
(Audio Video Remote Control Profile), and both profiles are available to listen
music at the Audio Unit via cellular phone which is supporting the two profiles above.
1) With a phone paired OK, press MEDIA (5) button on the Audio Unit to change
to BLUETOOTH mode, it would begin to play the music files in the paired Phone.
Note: For some phones, it might need to activate music play via the phone first.
2) During BT MUSIC playing, you could operate following functions on the Audio
Unit or via the paired Phone.
Next Track: Press Track up button.
Previous Track: Press Track down button.
Note: if the track elapse time is over 5 seconds, then need to press track down twice
to select the previous track. First press to go back to the beginning of the track,
press it again within 5s to go to previous track.)
MUTE: Press MUTE button mute sound output; press it again to resume.
Play/Pause: Press CALL END button to pause the music; press it again to resume.
Note: RPT, RDM, Track forward / rewind functions not work in Bluetooth mode.
3) ID3 Tag display
This Audio Unit could scroll display the ID3 of the songs while BT MUSIC
playing. (ID3 tag: Title/Artist/Album).
The Audio Unit supports A2DP (Audio Advanced Distribution Profile) and AVRCP
(Audio Video Remote Control Profile), and both profiles are available to listen
music at the Audio Unit via cellular phone which is supporting the two profiles above.
1) With a phone paired OK, press MEDIA (5) button on the Audio Unit to change
to BLUETOOTH mode, it would begin to play the music files in the paired Phone.
Note: For some phones, it might need to activate music play via the phone first.
2) During BT MUSIC playing, you could operate following functions on the Audio
Unit or via the paired Phone.
Next Track: Press Track up button.
Previous Track: Press Track down button.
Note: if the track elapse time is over 5 seconds, then need to press track down twice
to select the previous track. First press to go back to the beginning of the track,
press it again within 5s to go to previous track.)
MUTE: Press MUTE button mute sound output; press it again to resume.
Play/Pause: Press CALL END button to pause the music; press it again to resume.
Note: RPT, RDM, Track forward / rewind functions not work in Bluetooth mode.
3) ID3 Tag display
This Audio Unit could scroll display the ID3 of the songs while BT MUSIC
playing. (ID3 tag: Title/Artist/Album).
Bluetooth Operation
1. For some phones, you would receive a "phonebook access request"
while pairing process. You should accept the request, otherwise,
the phonebook would not allow to access via the Audio Unit.
2.
while pairing process. You should accept the request, otherwise,
the phonebook would not allow to access via the Audio Unit.
2.
to the run speed of the paired phone.
For some phones, it might scan the Phone Book slowly.
It depends
The ID3 could only be displayed when the paired phone
supports AVRCP1.4 profile.
supports AVRCP1.4 profile.