Справочник Пользователя для Data Critical Corporation 02DR-10100

WMTS OPENNET LAN PROGRAMMING AND DIAGNOSTICS

126

PatientNet Administrator’s Guide, v1.04, 10001003-004, Revision B

All information contained herein is subject to the rights and restrictions on the title page.

Downloading Ambulatory Transceiver (DT-4500) Firmware

You can download firmware modules for the DT-4500 and RF Module through the
Firmware Download Advanced Program Transceiver screen.

To download transceiver firmware:

1. Access the OpenNet LAN screen (page 101).
2. Access the Ambulatory Transceiver Program screen (page 123).
3. Click the F/W Download button to display the Advanced Program Trans-

ceiver Firmware Download screen (fig. 79).

Fig. 79. Firmware Download Advanced Program Transceiver Screen, AT

Note:

If no Firmware Download Modules appear in the blackboard, then call your
technical support representative to order the appropriate Download Firm-
ware Module Disk.

4. Use the up and down arrows to view the available transceiver firmware down-

load modules in the Download File Description field. Select the appropriate
download module for the transceiver type.

5. Click the Download Ambulatory Tx Firmware button to download the DT-

4500 firmware. The DT-4500 battery voltage is checked and verified prior to
downloading.
•

If the voltage check fails, then the transceiver programming is aborted.

•

If ample voltage is available, then the DT-4500 is powered off and the down-

loading popup appears. Click Continue to proceed with downloading the

new firmware. Click Cancel to abort the download and the transceiver’s

firmware is not modified.

6. Click the Download RF Module Firmware button to download the RF Mod-

ule’s firmware. Click Continue or Cancel when the downloading popup
appears.
•

Select Continue to proceed with downloading the new RF Module

firmware.

•

Click Cancel to abort the download and the firmware is not modified.

7. Click the Exit button to return to the Ambulatory Transceiver Programming

screen.