Справочник Пользователя для Bang & Olufsen BEOCOM4HS

5

When the handset is placed in the base, the battery is charged if 
necessary. For safety reasons, the battery is not charged when 
packed, so you must charge the battery for at least 20 minutes 
before using the phone. 

–  The base must be connected to the mains. 
–  It takes four hours to fully charge the battery. 
–  Talk-time per charge is approximately 12 hours. 
–  Standby time per charge is approximately 120 hours. 

After you connect the base to the mains and the telephone line, 

the display prompts you to set the time and date. The time is 

shown when the phone is not in use and when there is no new 

information in the display. Time and date are also shown with call 
information in the Calls list. 

‘Information’ appears in the display. Press OK to 

view the information 

Turn the wheel until ‘Clock not set’ is shown 

and press OK 

Turn the wheel to set the year 

Press to store and move to the next setting 

Complete the setting of the clock … 

Press to store the selected settings 

    Information    

         Clock         

not set

The handset controls battery 

charging, so you can always place 

the handset in the base after use, 

even if the battery does not need 
recharging. Leaving the handset in 

the base does not reduce the life-
time of the battery. Should it be 

necessary to replace the battery, 
please contact your Bang & Olufsen 
retailer. 

When the battery requires charging, 
a message appears on the display, 
and the handset beeps during 
calls. To both stop the signal and 
remove the warning message 
from the display during a call, 

press C.