Справочник Пользователя для DBTEL DB-2901
Access Codes
35
Access Codes
There are several codes required to access the
handset and UIM card. The access codes allow
you to avoid unauthorized use of your phone and
UIM card.
PIN Code
The PIN (Personal Identification Number) protects
the card against unauthorised use. This code is
supplied with the UIM card. If the PIN is set to
“Enable PIN,” the code is requested when the
phone is switched on.
If you enter an incorrect PIN code three times in
succession, the UIM card is blocked, key in the
PUK code.
the card against unauthorised use. This code is
supplied with the UIM card. If the PIN is set to
“Enable PIN,” the code is requested when the
phone is switched on.
If you enter an incorrect PIN code three times in
succession, the UIM card is blocked, key in the
PUK code.
PIN2 Code
This code is supplied with the UIM cards and is
required to access certain functions, such as
accumulated costs. If your UIM card supports
those particular functions, you can activate them
from your handset. If you enter an incorrect PIN2
code three times in succession, the PIN2 code is
blocked and you will be asked for the PUK2 code.
required to access certain functions, such as
accumulated costs. If your UIM card supports
those particular functions, you can activate them
from your handset. If you enter an incorrect PIN2
code three times in succession, the PIN2 code is
blocked and you will be asked for the PUK2 code.
PUK code
The PUK (Personal Unblocking Key) code is used
to unblock and change the locked PIN code. This
code may be supplied with the UIM card. If this is
not the case, check with your network service
provider for the code. If you enter an incorrect PUK
code ten times in succession, your UIM card will
no longer be valid.
Contact your network service provider to replace
the UIM card.
to unblock and change the locked PIN code. This
code may be supplied with the UIM card. If this is
not the case, check with your network service
provider for the code. If you enter an incorrect PUK
code ten times in succession, your UIM card will
no longer be valid.
Contact your network service provider to replace
the UIM card.
PUK2 code
The PUK2 code is used to unblock and change the
locked PIN2 code. This code is supplied with the
UIM. If you enter an incorrect PUK code ten times
in succession, the functions that require PIN2 code
for activation are no longer valid.
Contact your network service provider to replace
the UIM card.
locked PIN2 code. This code is supplied with the
UIM. If you enter an incorrect PUK code ten times
in succession, the functions that require PIN2 code
for activation are no longer valid.
Contact your network service provider to replace
the UIM card.