Справочник Пользователя для Microsoft Corporation 1045
4
If changing the channel does not solve the problem, you may need to reconnect the
device to the receiver.
To reconnect the keyboard or mouse to the receiver
1 Make sure that the device and receiver are positioned as specified earlier in this
manual.
2 Press the button on the top of the wireless receiver. The receiver lights blink to
indicate that it is in “connect” mode.
3 Press the Connect button on the bottom of the wireless keyboard or mouse. The
wireless keyboard or mouse may not work for a few seconds until the reconnection
process is completed.
Note You can reconnect only one device each time you press the receiver button, so
repeat as necessary for the other device.
If reconnecting the device to the receiver does not solve the problem, refer to
If reconnecting the device to the receiver does not solve the problem, refer to
the on-screen Help installed with the keyboard or mouse software for additional
troubleshooting information.
7 Read the On-Screen Help (optional)
Help for IntelliType Pro and IntelliPoint software contains the following important
product information in a searchable format:
● Hardware and software feature descriptions and instructions
● Troubleshooting topics and Product Support Services information
● Healthy Computing Guide
● End-User License Agreement (EULA), Limited Warranty, and regulatory information
● Battery removal and safety information
● Radio interference information
● Hardware and software feature descriptions and instructions
● Troubleshooting topics and Product Support Services information
● Healthy Computing Guide
● End-User License Agreement (EULA), Limited Warranty, and regulatory information
● Battery removal and safety information
● Radio interference information
To open Help for your keyboard or mouse
● Click Start, point to All Programs, point to Microsoft Keyboard or Microsoft
Mouse, and then click Keyboard Help or Mouse Help.
Help for Digital Image Standard 2006 software contains feature descriptions and
instructions that will help you work with the digital imaging software.
To open Help for Digital Image Standard 2006
1 Click Start, point to All Programs, point to Microsoft Digital Image Standard
2006, and then click the program you want to open Help for.
2 On the Help menu, click Digital Image Help or Digital Image Library Help,
depending on the program you chose in step 1.
8 Customize Your Devices (optional)
You can start IntelliType Pro keyboard software or IntelliPoint mouse software and
customize your devices.
X1111992bdy.indd 4
4/13/2005 1:23:42 PM