Справочник Пользователя для Microsoft Corporation 1060

 Position the receiver at least 8 inches (20 cm) away from your computer monitor,

computer case, and any other items that might cause interference (such as metal

filing cabinets, desktop fans, or fluorescent lights).

2  Position the keyboard and mouse

no less than 8 inches (20 cm) from

the receiver but no more than

6 feet (1.8 m) from the receiver.

This distance varies depending on

nearby items causing interference

and other factors.

The receiver light indicates the reconnection mode: when you press the receiver

button, the light blinks. If the mouse or keyboard is not working properly, try

reconnecting the device as described in the following section.

Try using the keyboard and mouse to make sure that they are working.

  Tip To test the keyboard, press the Windows logo key (

). This opens the Windows

Start menu.
If either device does not work as expected, make sure that the following procedures

were completed as specified earlier in these instructions:
●  New batteries are inserted and positioned correctly in both the keyboard and 

the mouse.

●  The keyboard, mouse, and receiver are correctly positioned and there are no 

nearby items that might cause interference.

●  The receiver is correctly connected to the computer.
To reconnect the mouse to the receiver
●  Press the Connect button on the receiver (located on top of the receiver next to

the receiver light), and then immediately press the

Connect button on the bottom

of the mouse. Using the tip of a pen may make it easier to press the button.

To reconnect the keyboard to the receiver
●  Press the Connect button on the receiver, and then immediately press the

Connect button on the bottom of the keyboard. To locate the Connect button,

turn the keyboard over, and then pull out the keyboard legs. The

Connect button

is located under one of the keyboard legs. Using the tip of a pen may make it

easier to press the button.

 Note   You can reconnect only one device each time you press the receiver button,

so repeat as necessary for the other device.

X118135301mnl.indd   2

12/19/2005   4:05:00 PM