Справочник Пользователя для Microsoft Corporation 1427

7

Caution  Use of controls or adjustments, or performance of procedures other than those specified herein 

may result in hazardous radiation exposure.

This device complies with International Standard IEC 60825-1:1993+A1+A2 (IEC 60825-1:2001-08) for a Class 

1 and Class 2 laser product. This device also complies with 21 CFR 1040.10 and 1040.11 except for deviations 

pursuant to Laser Notice No. 50, dated June 24, 2007.
Class 1 Laser Devices 
Beam description: Collimated (parallel) beam of infrared light (invisible to 

the user) 

Laser power output: < 716 microwatts (at 832 nanometers) to 834 microwatts 

(at 865 nanometers) 

Emitted laser wavelength: nominal: 850 nanometers, range: (832 – 865 

nanometers)
A Class 1 laser product is safe under reasonably foreseeable conditions 

of operation as described by IEC 60825-1 and 21 CFR 1040.10. However, it 

is recommended that you not direct the laser beam (which is emitted from the bottom of the device) at 

anyone’s eyes. 
Class 2 Laser Devices
Beam description: Collimated (parallel) beam of light 

Laser power output: < 1 milliwatt 

Emitted laser wavelength: 630 – 670 nanometers
This optical device has no serviceable parts. The Class 2 

laser beam is emitted from the front of the device.

This product has been evaluated to comply with International Standard IEC 

60825-1:1993+A1+A2 (IEC 60825-1:2001-08).
This product uses LEDs that are considered Class 1 (IEC 60825-1:1993+A1+A2).
LED output power: < 67.8µW (photochemical limit), < 4.2mW (thermal limit)
LED nominal wavelength: 470nm (blue), 635nm (red)
A Class 1 product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1.  

However, it is recommended that you not direct the light (which is emitted from the bottom of the device) at 

anyone’s eyes.
This optical device has no serviceable parts.

IEC 60825-1:2001-08

X156362301mnl.indb   7

4/8/09   6:57:00 PM