Справочник Пользователя для Microsoft Corporation 1679
6
All Devices
Do Not Attempt Repairs
Do not attempt to take apart, open, service, or modify the hardware device or power supply. Doing so could
Do not attempt to take apart, open, service, or modify the hardware device or power supply. Doing so could
present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify the
device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.
Choking Hazard
This device may contain small parts which may be a choking hazard to children under 3. Keep small parts
Choking Hazard
This device may contain small parts which may be a choking hazard to children under 3. Keep small parts
away from children.
Usage and Cleaning
Use in accordance with these instructions:
Usage and Cleaning
Use in accordance with these instructions:
● Do not use near any heat sources.
● Only use attachments/accessories specified by Microsoft.
● Clean only with dry cloth.
● Only use attachments/accessories specified by Microsoft.
● Clean only with dry cloth.
Keeping Cables Out of the Way of People and Pets
Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as
Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as
they move around or walk through the area. When the product is not in use, you may need to disconnect all
cables and cords from the front and rear of the product to keep them out of the reach of children and pets.
Do not allow children to play with cables and cords.
Laser and LED Specifications
Caution Use of controls or adjustments, or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Laser Devices
This device complies with International Standard IEC60825-1:1993+A1+A2 (IEC 60825-1:2001-08) for a
Class 1 and Class 2 laser product. This device also complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Class 1 Laser Devices
Beam description: Collimated (parallel) beam of infrared light
Class 1 Laser Devices
Beam description: Collimated (parallel) beam of infrared light
(invisible to the user)
Laser power output: < 716 microwatts (at 832 nanometers) to 834 microwatts
(at 865 nanometers)
Emitted laser wavelength: nominal: 850 nanometers,
range: (832 – 865 nanometers)
A Class laser product is safe under reasonably foreseeable conditions of operation as described by
A Class laser product is safe under reasonably foreseeable conditions of operation as described by
IEC 60825-1 and 21 CFR 1040.10. However, it is recommended that you not direct the laser beam (which is
emitted from the bottom of the device) at anyone’s eyes.
CLASS 1
LASER PRODUCT
IEC 60825-:200-08
X121690305mnl.indb 6
5/21/2008 3:15:52 PM