Справочник Пользователя для Microsoft Corporation MN700
20 Microsoft Broadband Networking Wireless Base Station User’s Guide
Filename: G_Ch3_CSRouter.doc Project: H1_top
Template: BBN_A5_1col_ltr_fix.dot Author: ArleneR Last Saved By: S&T
Revision #: 19 Page: 20 of 10 Printed: 06/21/03 11:23 PM
To configure the TCP/IP properties on a computer running Windows XP operating
system
system
1. Click Start, click Control Panel, and then double-click Network Connections.
2. Double-click the icon for the connection you want to configure, and then, in the
Connection Status dialog box, click Properties.
3. On the General tab, under This connection uses the following items, click Internet
Protocol (TCP/IP), and then click Properties.
4. Click Obtain IP address automatically, and then click Obtain DNS server address
automatically.
5. Click OK to close the TCP/IP Properties dialog box, and then click OK to close the
Connection Properties dialog box.
Step 9: Test your Internet Connection
1. Turn on your broadband modem.
2. From the Home page of the Base Station Management Tool, under Wide Area
Network (WAN) settings, check the status of the Broadband connection.
3. If the status is Connected, your setup is complete. If the status is Disconnected,
click Renew if you have a dynamic or static IP connection, or Connect if you have a
PPPoE connection. If the status is still Disconnected, confirm your Internet settings
with your ISP, and then try to configure the base station again.
PPPoE connection. If the status is still Disconnected, confirm your Internet settings
with your ISP, and then try to configure the base station again.