Справочник Пользователя для Microsoft Corporation MN730

10     Microsoft Broadband Networking Wireless PCI Adapter User’s Guide 

 
Filename: G_Ch2_SetupPCI.doc     Project: H1_top    
Template: BBN_A5_1col_ltr_fix.dot     Author: ArleneR     Last Saved By: ArleneR 
Revision #: 18     Page: 10 of 6     Printed: 06/22/03 01:13 AM 
 

8. Adjust the antenna so that it points upward and away from any adjacent cabling, as 

shown in the following illustration. Make sure that the antenna is screwed in snugly, 
being careful not to overtighten it.  

 

 

 

9. Plug in the power cord, and make sure that no other cables have come loose during 

installation. 

 

Step 4: Configure the Adapter 

1. Turn on your computer. 

When Windows starts, the Setup Wizard automatically resumes. 

Note   If you originally logged on as an administrator to begin Setup, make sure that 
you log on by using the same account after you restart your computer. 

2. Continue following the instructions in the Setup Wizard.  

3. When the wizard asks what type of network you have, select the option that best 

describes the network that you want to join. 

Important   If you want to share a broadband Internet connection on your network, it is 
recommended that you set up a network that uses a base station, gateway, or router. If 
you choose not to set up a base station on your network, you should set up security 
features on the computer that is sharing the Internet connection. If you have 
Windows XP, you can use Internet Connection Firewall to help provide such security. If 
you don’t have Windows XP, be sure to use other measures to help provide a security 
layer between your network and the Internet. For more information about security, see 
“Making Your Network More Secure” in Chapter 4.